Fisher F5 Metal Detector

Please contact us at 714-693-4653 to check availability and to place your order. Thank you.

The Fisher F5 Visual & Audio Target ID Metal Detector Combines the Best in Analog and Digital Technology. High Resolution Manual Ground Balance. Recommended for coin, relic, jewelry and beach hunting.

• Visual Target ID by Category
• Numeric 0-99 Readout
• Frequency Shift
• Target ID Confidence Bar Graph
• One Touch Notch
• Push Button Static Pinpoint with Variable Audio Pitch and Depth Reading
• Threshold and Gain Adjustments
• Continuous Ground Mineralization Phase Readout
• 4 Tone Audio ID


F5 Specifications

Mechanical: S-rod with electronics housing on rod, 3-piece breakdown construction, nonmetallic telescoping lower rod, adjustable position arm rest

Weight: 3.0 lbs (1.38 kg) with batteries installed Standard Search Coil: 10 inch (25 cm) open-frame elliptical concentric, waterproof

Batteries: two 9 volt rectangular alkaline (will run on one)

Operating Principle: VLF induction balance

Operating Frequency: nominal 7.8 kHz, microprocessor controlled

Basic Sensitivity: 2.5 x 109 root Hertz (detectivity)

Lag Coefficient: 92 milliseconds

Reactive Overload: 5,000 micro-cgs (with standard search coil)

Resistive Overload: 600 micro-cgs (with standard search coil)

Ground Balance Range: from ferrite to salt water inclusive

Discrimination Ground Suppression: combination of 2nd and 3rd order methods

Target ID Ground Suppression: 3rd order

Battery Life: 40+ hours on good quality alkaline

Operating Temp Range: 14 to 122 degrees F (-10 to +50 C)

Operating Humidity Range: 0 - 90% non-condensing